全新現貨

地區:广东 深圳
認證:

深圳市旺財半導體有限公司

VIP會員9年

QQ咨詢 進入商鋪

马达/运动/点火控制器和驱动器 2A LO VLTG BIPOLAR STEPPER MOTOR DRIVER  IC MOTOR DRIVER PAR 16HTSSOP    主要应用于:  DC 电机,通用,螺线管,步进电机   

1 Features 3 Description The DRV8833 device provides a dual bridge motor 1• Dual-H-Bridge Current-Control Motor Driver driver solution for toys, printers, and other – Can Drive Two DC Motors or One Stepper mechatronic applications. Motor The device has two H-bridge drivers, and can drive – Low MOSFET ON-Resistance: HS + LS 360 two DC brush motors, a bipolar stepper motor, mΩ solenoids, or other inductive loads. • Output Current (at VM = 5 V, 25°C) The output driver block of each H-bridge consists of – 1.5-A RMS, 2-A Peak per H-Bridge in PWP N-channel power MOSFETs configured as an Hand RTY Package Options bridge to drive the motor windings. Each H-bridge – 500-mA RMS, 2-A Peak per H-Bridge in PW includes circuitry to regulate or limit the winding current.Package Option • Outputs can be in Parallel for Internal shutdown functions with a fault output pin are provided for overcurrent protection, short-circuit– 3-A RMS, 4-A Peak (PWP and RTY) protection, undervoltage lockout, and – 1-A RMS, 4-A Peak (PW) overtemperature. A low-power sleep mode is also • Wide Power Supply Voltage Range: provided. 2.7 to 10.8 V The DRV8833 is packaged in a 16-pin WQFN • PWM Winding Current Regulation and Current package with PowerPAD™ (Eco-friendly: RoHS & no Limiting Sb/Br). • Thermally Enhanced Surface-Mount Packages Device Information(1) 2 Applications PART NUMBER PACKAGE BODY SIZE (NOM) TSSOP (16) 5.00 mm × 4.40 mm• Battery-Powered Toys DRV8833 HTSSOP (16) 5.00 mm × 4.40 mm• POS Printers WQFN (16) 4.00 mm × 4.00 mm• Video Security Cameras (1) For all available packages, see the orderable addendum at• Office Automation Machines the end of the data sheet. • Gaming Machines • Robotics



       


 

  我司有原装现货库存,QQ:373621633    TEL:15889871117  李先生



型號/規格

DRV8833PWPR

品牌/商標

TI(德州儀器)

封裝

HTSSOP-16

電源電壓

2.7V-10.8V

最小溫度

-40